Adres: ul. Poznańska 9, Cierpice, 87-103 Toruń 5, woj. kujawsko-pomorskie

NIP: 8792669093

  • POWER ENGINEERING

    Units for separation of metals from coal and alternative fuels

  • MINING AND CEMENT INDUSTRY

    Units for separation of metals from clinker, limestone, granite and other mineral resources

  • Recycling

    Units and complete systems for the recovery of metals in the recycling processes of various materials

  • MAGNETIC TRANSPORT

    Complete magnetic systems for the transport and handling of steel

  • Food industry

    Units for detection and separation of metals in food

Products

Over-belt electromagnetic separator (SNK)

The over-belt electromagnetic separator type SNK is intended for removal of tramp iron from bulk materials transported on conveyor belts or vibratory feeders.

Over-belt magnetic separator (STM)

The over-belt magnetic separator type STM is intended for removal of tramp iron from bulk materials transported on conveyor belts or vibratory feeders.

Magnetic block (PMT)

The magnetic block type PMT is intended for removal of tramp iron from bulk materials transported on conveyor belts or vibratory feeders.

Eddy current separator (SWP)

Eddy current separator type SWP is intended for removal of non-ferrous metals from bulk or crushed material fed to the separator.

Magnetic pulley (BM)

The magnetic pulley type BM is intended for removal of large and small tramp iron from bulk materials transported on conveyor belts.

Magnetic drum separator (SBM)

The magnetic drum separator type SBM is intended for removal of tramp and fine iron from bulk materials.

Magnetic plate (PM)

The magnetic plate type PM is intended for removal of tramp and fine iron contaminants from bulk materials.

Magnetic plate separator (SPM)

The magnetic plate separator type SPM is intended for removal of tramp and fine iron contaminants from bulk materials transported on free-fall chutes or by the pneumatic pipelines.

Magnetic cone separator (SMS)

The magnetic cone separator type SMS is intended for removal of tramp and fine iron contaminants from bulk materials transported on free-fall chutes or by the pneumatic pipelines.

Magnetic Grade (SM SMA)

Magnetic Grade type SM is intended for removal of fine iron contaminants from fine-grained bulk materials transported on free-fall chutes.

Magnetic filter (FM)

The magnetic filter type FM is intended for removal of fine iron contaminants from fluid or semi-fluid materials transported by the pressure pipelines.

Eddy current separator (SWP 26B)

Eddy current separator type SWP 26B is intended for removal of non-ferrous metals with grain size over 1 mm from bulk or crushed material fed to the separator.

Eddy current separator (SWP 20B)

Eddy current separator type SWP 20B is intended for removal of non-ferrous metals with grain size over 10 mm from bulk or crushed material fed to the separator.

Tunnel metal detector (DMD)

The tunnel metal detector type DMD is intended for detection of ferrous and non-ferrous metals in the bulk materialtransported on conveyor belts. The DMD metal detector  protects process machines against damage caused by an unwanted piece of ferrous metal.

Tunnel metal detector (DMG)

The tunnel metal detector type DMG is intended for high sensitivity detection of ferrous and non-ferrous metals in the finished goods transported as bulk material or in packages on belt conveyors in food, pharmaceutical and chemical industry.

Round metal detector (DMO)

The round metal detector type DMO is intended for installation in pipelines to detect with the highest sensitivity ferrous and non-ferrous metals in bulk materials, fibres and pastes. 

Flat metal detector (DMP)

The flat detector type DMP is intended for installation under conveyor belts to detect ferrous and non-ferrous metals with high sensitivity in products lying flat on the belt or bulk materials with height up to 100 mm.

Metal separator (DMR)

The metal separator type DMR is intended for removal of metals from free falling bulk materials. 

X-ray detector (DMX)

The DMX detector consists of the short belt conveyor with the integrated X-ray detector adapted to detection of foreign bodies such as: metals, glass, stones, bones, rubber, plastics etc. mainly in bulk food products or packed ones. 

Metal samples for metal detectors

Testers for control of correct working and settings of metal detectors.

Circular lifting magnet (EO)

The cilcular lifting magnet type EO is intended for lifting and handling of ferromagnetic materials: blocks, castings, sheet and wire coils with vertical axis and ferrous scrap.

Rectangular lifting magnet (EP)

The rectangular lifting magnet type EP is intended for lifting and handling of ferromagnetic materials: sheets, slabs, billets, pipes, channels and other sections, sheet and wire coils with horizontal axis.

Set of lifting magnets

Set of lifting magnets mounted on the common cross-beam are intended for transport and reloading of long sheets, reinforcing bars, rails and sections.

Permanent lifting magnet (CMP)

The permanent lifting magnet type CMP is intended for lifting, handling and positioning of elements made of magnetic steel.

Magnetic conveyor (TM)

The magnetic conveyor type TM is intended for transport parts made of ferromagnetic steel up steep incline, vertical or inverted position.

 
 

Magnetic devices

CloseUsing the website (www.magnetix.com.pl) means acceptance of the terms contained in the privacy policy. In particular, this applies to the acceptance of the processing and storage of personal data collected through this Site and used for marketing and commercial purposes. This website uses cookies collected for statistical purposes and used for the proper operation of the website. Conditions for storage or access cookies, you can change your browser settings - failure to change the browser settings, you consent to the saving.